Application Notes

Sort

Improving pH Measurement in Drinking Water Monitoring
Thursday, March 14, 2019
Ricki Hartwell
Advances in pH electrode technology based on iodide/triiodide reference systems and novel electrode designs are improving the reliability, stability, and longevity of pH measurement systems. Read More
Improving Protein Purification Efficiency of Biologics
Tuesday, May 01, 2018
Candice Cox
Multi-D chromatography reduces time to results and increases the robustness and reproducibility of small-batch biologic purification. Read More
Improving Refinery Laboratory Productivity 20% While Increasing Accuracy With LIMS
Thursday, March 01, 2007
Robert Hudson
In process manufacturing, a laboratory information management system (LIMS) implementation will deliver exceptional value if it eliminates redundant data transcriptions within the laboratory, ... Read More
Improving the Crystallization Process for Optimal Drug Development
Friday, March 28, 2014
Michael Collazo Soheila Vaezeslami Sarah Burl
Macromolecular X-ray crystallography is an important and powerful technique in drug discovery. Studying the specific interactions of a particular drug with its protein target at the atomic level can ... Read More
Impurity Evaluation of Heparin Sodium by Anion Exchange Chromatography
Thursday, October 01, 2009
Catalin E. Doneanu Weibin Chen
As a blood-thinning drug, heparin and its derivative, low-molecular-weight heparin (LMWH), have been widely used for decades during surgery and kidney dialysis. Read More
In Situ Electrochemical SPM for Energy and Corrosion Studies
Wednesday, August 07, 2013
Shijie Wu
Renewable energy technologies such as solar and wind have been gaining momentum due to a growing awareness of climate change and limited resources (e.g., fossil oils) as well as greater support from ... Read More
In Situ Gas Heating and Real-Time 3-D Imaging Using a Transmission Electron Microscope
Tuesday, April 01, 2008
Xiao Feng Zhang
In situ atomic resolution imaging with gas injection and sample heating, and real-time three-dimensional structural and chemical characterizations are important features of the Hitachi H-9500 300 kV ... Read More
In-House Pipette Calibration: The Lean Way
Thursday, October 08, 2015
A. Björn Carle
Sorenson Genomics of Salt Lake City focuses on DNA testing, with its expertise in quality, high-throughput testing that spans several diverse business units and highly accredited laboratories. Read More
Increased IEF Throughput Using a Dual-Electrode Assembly
Tuesday, August 02, 2011
Gary B. Smejkal Darren J. Bauer
An isoelectric focusing (IEF) apparatus capable of operating at 12,000 V maximum voltage enables isoelectric focusing of proteins in immobilized pH gradients (IPGs) to be completed in less than 3 hr. Read More
Increased Throughput in Method 8270 Analysis
Monday, January 01, 2007
William D. Goodman Frank DeLorenzo
Method 8270 is a GC-MS method created by the U.S. EPA Office of Solid Waste for the analysis of semivolatile organics by gas chromatography-mass spectrometry. Read More
$Increasing Application of X-Ray Powder Diffraction in the Pharmaceutical Industry$
Increasing Application of X-Ray Powder Diffraction in the Pharmaceutical Industry
Wednesday, June 01, 2005
Brian Litteer Detlef Beckers
X-ray powder diffraction has recently been propelled to the forefront as an analytical tool in the pharmaceutical industry for a wide range of applications. Read More
Increasing Precision When Pipetting Protein Samples: Assessing Reliability of the Reverse Pipetting Technique
Tuesday, February 01, 2011
Irmgard Suominen Sami Koivisto
Handheld pipets are commonplace in any laboratory and are used in the vast majority of applications. Read More
Increasing Protein Expression With Stackable Shakers
Thursday, March 10, 2011
Mark Schofield
With the 2012 Olympics fast approaching, many still remember the trouble caused by one of the most notorious recombinant proteins, human growth hormone (HGH). Read More
Increasing Quality Control Testing Efficiency with Compliant-Ready SOP Digital Forms
Monday, March 01, 2010
Thomas Schmidt Wolfgang Lemmerz Chris Stumpf
A survey of pharmaceutical team leaders conducted in 2005 found that the three biggest challenges facing pharmaceutical manufacturing were standard operating procedures (SOPs) and training, quality ... Read More
Increasing Throughput and Lowering Detection Levels in ICP-MS Analysis Using a Microwave Digestion Quartz Rotor for Sample Preparation
Wednesday, August 01, 2007
Tim Michel Victoria Jacobs Merrill Loechner
Analytical chemists are being asked to perform trace and ultratrace metals analysis on a routine basis. Read More
Increasing Throughput and Recoveries for Highly Particulate and Sediment Laden Aqueous Samples Using the Fast Flow Sediment Disk Holder for Semi-Volatiles
Tuesday, October 09, 2012
David Gallagher Michael Ebitson
Samples that contain large amounts of sediment or particulates are difficult to extract using U.S. EPA Method 3535 (SPE, solid-phase extraction). While a standard 47-mm SPE disk is able to process a ... Read More
Individual Cell Analysis for Protein Expression and Cell Health Markers
Tuesday, March 21, 2017
Robin T. Clark
The Muse instrument uses microcapillary fluidics and preoptimized reagents to create an inexpensive, compact, portable cell analyzer that requires minimal setup and no expertise to operate. Read More
Influence of Instrumental Conditions on the Electrospray Ionization Mass Spectrometry of Peptides/Proteins in Mixtures
Wednesday, February 01, 2006
Seetharaman Vaidyanathan
The simultaneous detection of several peptides or proteins in mixtures is an integral part of expression proteomics investigations. Read More
Inhibition Performance of Scale Inhibitors at Different Temperatures and Analysis of Inhibition Mechanism
Tuesday, August 07, 2018
Xiuhua Zheng Wenxi Zhu Dehua Hu Guomin Li
Geothermal energy is a clean and renewable energy source with considerable potential for development. Read More
Innovations in Metals Analysis Optimize the Process
Thursday, January 18, 2018
David Smith
From reagent addition to sample digestion, faster, and safer metals digestion can be achieved with the latest technology. Read More

Sort

Improving pH Measurement in Drinking Water Monitoring

Improving Protein Purification Efficiency of Biologics

Improving Refinery Laboratory Productivity 20% While Increasing Accuracy With LIMS

Improving the Crystallization Process for Optimal Drug Development

Impurity Evaluation of Heparin Sodium by Anion Exchange Chromatography

In Situ Electrochemical SPM for Energy and Corrosion Studies

In Situ Gas Heating and Real-Time 3-D Imaging Using a Transmission Electron Microscope

In-House Pipette Calibration: The Lean Way

Increased IEF Throughput Using a Dual-Electrode Assembly

Increased Throughput in Method 8270 Analysis

Increasing Application of X-Ray Powder Diffraction in the Pharmaceutical Industry

Increasing Precision When Pipetting Protein Samples: Assessing Reliability of the Reverse Pipetting Technique

Increasing Protein Expression With Stackable Shakers

Increasing Quality Control Testing Efficiency with Compliant-Ready SOP Digital Forms

Increasing Throughput and Lowering Detection Levels in ICP-MS Analysis Using a Microwave Digestion Quartz Rotor for Sample Preparation

Increasing Throughput and Recoveries for Highly Particulate and Sediment Laden Aqueous Samples Using the Fast Flow Sediment Disk Holder for Semi-Volatiles

Individual Cell Analysis for Protein Expression and Cell Health Markers

Influence of Instrumental Conditions on the Electrospray Ionization Mass Spectrometry of Peptides/Proteins in Mixtures

Inhibition Performance of Scale Inhibitors at Different Temperatures and Analysis of Inhibition Mechanism

Innovations in Metals Analysis Optimize the Process

Product Guide

Micromachined HPLC Columns Can Revolutionize Proteomics Workflows

Buyer's Guide: GC-MS for Monitoring Environmental Pollutants

Refocusing the Lens of Cancer Screening

Study: NGS Should Be Go-to Technology on Day Zero of the Next Pandemic

Overcoming Common Challenges in Sample Viability for Single-Cell Research